After you have configured Vendo using VSERVICES as a biller in NATS, you need to create programs. Here is how you do it.
There are 5 simple steps that you'll need to follow to set this up
This is the time required to complete each step:
| Step # | Description | Duration |
| 1 |
Go to Program Admin in NATS, Click Create New Enabled Program, then Add New Program as desired. |
5 minutes |
| 2 |
Scroll down to Tours in This Program section and add the site / tour you had previously configured, add it to this program and save the changes. |
5 minutes |
| 3 | Go to Programs List > Search for your Program in the list and > now add the affiliates for this program by clicking List & Modify Enabled Affiliates icon, then search and select affiliates | 10 minutes |
| 4 |
Go to the Main Dashboard and select Linkcodes, create and obtain Linkcodes |
10 minutes |
| 5 |
Edit Cascade Options for VSERVICES. |
10 minutes |
| Total duration of integration: 55 minutes | ||
Please note that if you're setting many programs some steps might take a bit longer to complete.
Step 1 (5 minutes)
Go to your Programs Admin in NATS >
> Click Create a New Enabled program
> Create the Program, make sure to select Standard Program > Add Program
Step 2 (5 minutes)
After clicking Add Program button, scroll down to Tours in This Program section and add the site / tour you had previously configured, add it to this program and save the changes.
Step 3 (10 minutes)
Go to Programs List > Search for your Program in the list and > now add the affiliates for this program by clicking List & Modify Enabled Affiliates icon
Now search & select the affiliates and enable them
After this you will have ready your site with offers and programs
Step 4 (10 minutes)
Go to the Main Dashboard and select Linkcodes under Ad Tools.
You will see all your linkcodes and you can search by using the filters.
For more information on Linkcodes: http://tmmwiki.com/index.php/NATS4_LinkCodes
The Linkcode is what you put in your Tours. It will be shown in Encoded Linkcode. If you add /join to the URL provided, it will automatically try to load Vendo Prejoin page.
If you go to the provided Encoded Linkcode it could give an error like You must have at least one enabled cascade for this site! because you might still be missing the cascade configuration in Billers Admin.
Step 5 (10 minutes)
To set this up, Go to Billers Admin > on Biller Cascades > Go to the Cascade for VSERVICES you have previously set up and > click on the Cascade Rules icon to finish configuring the cascade rules.
Select the Affiliate, Program and Site for which you want to enable this rule
Done!
Please use the comments section below to ask any additional information.
You can also contact us at clientservices@vendoservices.com